MR BOND POLYCHEM
Anchore Grout

Anchore Grout

Send Inquiry

With an objective to serve clients in best possible manner, we have been affianced in providing top notch grade Anchore Grout. This grout is ideal for grouting inserts into concrete surface in construction industry. The offered grout is also known for bonding ceramic, stone and wood etc. In addition to this, the provided Anchore Grout can be bought from us at industrial leading prices.

Key Points:

  • Known for high strength
  • Corrosion resistance
  • Ideal to dry or damp concrete 
  • Ruggedness

BOND GROUT POAG - 01

POLYESTER ANCHOR GROUT

POLYESTER ANCHOR GROUT It is two pack polyester resin based anchoring or grouting material used in the form of mortar. Part-A & B are mixed before use in overhead or horizontal applications. The thyrotrophic consistency of the mix prevents the grout from flowing out of the hole.

WHERE TO USE:- .

  • Uses Foundation bolts base and stress anchor plates Tie-back anchorsĀ·
  • Overhead rail tracksĀ·
  • Starter bars and dowels Advantages Rapid strength gain
  • Vibration resistant
  • Corrosion resistant
  • Non - expansive Can be placed under water

SURFACE PREPARATION:- Ensure all the sides are roughened and dust free. To clean the holes thoroughly, using oil free compressed air. Thoroughly flush the substrate with water. Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations

METHOD OF USE:- Pour Part-A into a pan. Add Part-B from the tin container. Mix the two to produce a smooth thixotropic paste. Mixing may be carried out mechanically or manually using gloved hands. Pour the mix into the hole and fasten the bolts, hooks or anchors. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required. EPAG-01 packs have been designed to produce practical and economic volumes of grout. Do not mix partial pack components

PROPERTIES

POAG-01

TYPE

POLYESTER ANCHOR GROUT

Consistancy

Mortar

Mortar Gel Time

30 minutes

Compressive Strength @3 Hrs

20 Mpa

Compressive Strength @7 Days:

70 Mpa

After the minimum time required for loading the grout, it attains a compressive strength

20N/mm2 3 hrs and a final compressive strength of 70N/mm2 in 7 days

Coverage

1 kg PEAG-01 yields 0.5 litres approx

Gel Temp. Gel time

30 oC 40-45 min

40 oC 15-20 min

Min Time Required Before Loading (hrs)

2-3

1

STORAGE LIFE

6 Months